Jingdong, typical Chinese-style self-employed business enterprise, has its Jingdong Mall, Jingdong financial, Jingdong intelligence department. May 2014 in the US Nasdaq stock exchange officially listed. 2018 "Fortune" Global 500 list of the 181. Fast boiler, A-class boiler manufacturing unit, Class 1 boiler installation company, more than 20 years dedicated to the development of clean fuel energy equipment, manufacturing and sales. The introduction of low nitrogen emission boiler is the first time in a market-oriented approach using FGR technology products, as guardian of the "APEC blue" gave their part.

How to maintain water tube boiler steam boiler or plant 1, when maintaining boiler, must cut off the power supply, must release pressure. 2, burners should be removed from boiler body every two months, and other foreign bodies such as carbon deposit and dust should be removed seriously. The photo-electric tube is polished once a month. The fuel filter should always be cleaned and filtered. Carefully clean the inner filter screen of the oil pump and do not destroy the gasket. The burner shall not run without oil to prevent damage to the oil pump. 3, the water level gauge shall be kept clean at all times and rinsed once a day by opening the cleaning valve to ensure the water level is clear. 4. The safety valve shall be pulled once a day in case of rust failure. 5, When the steam boiler stops running for a long time The power supply should be cut off and the maintenance work should be done: (1) dry maintenance, discharging the furnace water after the furnace is stopped, rinsing away the dirt in the furnace, drying the pot with a small burner fire (the burning time should not be too long, so as not to damage the boiler), Then, after all the boiler gas has been discharged, all pipe valves will be closed and checked every three months. (2), wet maintenance shall be applied to boilers with a period not exceeding one month, and the boiler water will be discharged after the shutdown, and the clean and full water will be discharged. Cut off the power supply and close the valve.

Overview of 75 Ton Gas Fired Steam Boiler

75 ton gas fired steam boiler is designed and manufactured in ZG Boiler and it has obtained its own patent, and the brand is ZG. 75 ton gas fired steam boiler has a flexible fuel adaptability, it can burn blast furnace gas, natural gas, coke oven gas, residual oil, refinery fuel gas and so on.

Gas-fired water tube boiler steam boiler or plants can be cleaned during cleaning using efficient and environmentally friendly non-corrosive detergents. This will cause the tube to expose the primary color of the metal and reduce the impact of dirt and bio-algal sludge. After ignition of gas-fired steam boiler, attention should be paid to observing the furnace temperature and the temperature of the main steam. With the increase of main steam pressure, the flue gas temperature of boiler is obviously increased after ignition. If the temperature does not rise, you should go to the scene immediately to inspect the oil gun fire. The scale thermal conductivity of a gas-fired steam boiler is only 1/10 of that of steel. This hinders heat transfer when it scales on a heated surface. In order to keep the boiler in use The output shall increase the temperature on the combustion side. The increase of outlet temperature of gas-fired steam boiler increases the loss of gas-fired steam boiler, and the scale on the water wall of equipment will effectively reduce the heat transfer effect, which may lead to the increase of the temperature of water wall and the burst of water wall. When a gas-fired steam boiler is in operation, a series of chemical and physical reactions will occur in the furnace. In use, it will effectively form a hard and dense scale on the heated surface, which will directly lead to its heat exchange. The reduced efficiency and corrosion due to scale will reduce the heat absorption of gas-fired boilers.