As we all know,boiler thermal efficiency is calculated fuel’s low calorific value.does not consider the high calorific value of the fuel heat loss in the amount of the latent heat of vaporization.Therefore,the boiler thermal efficiency is generally only reach 70 to 85 percent.Thermal efficiency is about 80%,about 20% of the heat distributes from the furnace surface and wastes smoke evacuation.

Improper methods how to solve boiler with a boiler water treatment to be applied more widely up, while there are many companies to reduce costs, save money, boiler water treatment will often take unscientific method, and in the boiler water treatment process as used tools, instruments, also do not meet the relevant requirements, such as three non-electronic scale equipment and antifouling agents. Speaking from personal interests, this approach not only to minus expenses chemicals can also be removed from water analysis personnel expenses, but not fundamentally solve the problem of boiler scale and corrosion, but not only resulted in a waste of energy also reduces the life of the boiler. Also, if used improperly will play a scale inhibitor for the protection of the boiler opposite effect, accelerate the scaling and corrosion of boilers, to the normal operation of the boiler poses a serious threat. For the case of improper boiler water treatment method to re-adjust the boiler water treatment, for the use of new technologies to be approved by the relevant departments for the record and to report to the local labor department, before new technology on the specified boiler treatment, if the boiler water treatment to get good results, then the promotion given by the higher authorities after technical accreditation in order to ensure that the boiler can be used safely. In summary, boiler water treatment method is inappropriate measures to address, in order to ensure the safe use, we must use the correct method to treat boiler water, avoid safety hazards caused by improper handling.

Indicators of environmental protection and energy-saving features of the basic structure of the boiler: the combined energy saving boiler is divided into two parts: one continuous gas furnace (see its features continuous-type gas furnace Introduction); the second is the new dedicated gas boiler (old-fashioned boiler also can be modified to use). Boiler combined with environmentally friendly energy different from the conventional boiler is increased number of water wall tubes while an annular interior of the furnace core tube, so that the heated area increased by 30% compared to conventional oven, heat efficiency is improved, and having a heating speed , temperature and pressure stability, controllability and other characteristics. Environmental standards: a combined energy saving boiler, smoke, dust removal, desulfurization itself once completed, no further dust, sulfur. Environmental Monitoring Center by monitoring the indicators is as follows: 1. Average dust emission concentration 54mg / m3 meet GB13271-2001 (Ⅱ period a zone-based dust emission concentration 80mg / m3). 2. smoke Ringelman of <1 grade, non-visible combustion. 3. Average SO2 emission concentration of 665mg / m3, GB13271-2001 standard requirements (period Ⅱ SO2 emission limit concentration of 900mg / m3).

Six months from Hainan Sinochem Pharmaceuticals boiler equipment normally used in odd years, the equipment in good condition, our technical staff has repeatedly went to inspect the guidance. In the process of Hainan with the pharmaceutical companies, the other either for my company's product or service we are very satisfied with our company's reputation and expressed trust. --customer feedback