high efficiency gas fired laundry steam boiler

Shangqiu City, Henan Province in 2018 coal-fired boilers Chaigai capital subsidy policy

Shangqiu City coal-fired boilers Chaigai target

"Shangqiu City People's Government Office on the issuance of Shangqiu City in 2018 air pollution control campaign of the embodiments notice" clearly requires otherwise, the city completed the basis of 10 tons of steam / h boiler and Chaigai on coal-fired, coal-fired boiler demolition and gradually expand clean energy transformation range, guide and encourage medium-sized coal-fired boilers eliminated. Before the end of 2020, basically eliminated 35 tons of steam / h and coal-fired boilers within the scope of the urban planning area.

Shangqiu City coal-fired boiler subsidy

Shangqiu City coal-fired boiler subsidy implemented gradually decline Chaigai way.

The completion of the coal-fired boilers Chaigai before the end of October 2018, giving 60,000 yuan / tons of steam financial awards complement;

The completion of the coal-fired boilers Chaigai before the end of October 2019, giving 40,000 yuan / tons of steam financial awards complement;

The completion of the coal-fired boilers Chaigai the end of October 2020, the prize money will not give up. At the same time, it prohibited the use has been shut down, eliminated waste coal-fired boilers taking state funds.

Coal-fired boilers have been abandoned prospects for environmental protection boiler can be expected by the end of 2014, the city authorities will be coal-fired boiler, tea bath furnace conduct a comprehensive investigation, the completion of the city's coal-fired boiler, tea bath furnace investigation to establish the investigation file. By the end of 2015, the central heating, coal to gas, coal to electricity projects, urban built-up area of ​​Dazhou out of 10 tons of steam per hour of coal-fired boilers, tea bath furnace, a ban on new coal-fired boilers; counties (cities ) no new 10 tons of steam per hour of coal-fired boilers. By the end of 2017, within the city's jurisdiction phasing out 10 tons of steam per hour of coal-fired boilers. In other parts of the supply pipe network covering less than, change electricity, new energy or clean coal, promote the use of environmentally friendly energy efficient boiler systems. Chemical, paper, printing and dyeing, pharmaceutical and other business gathering area, by focusing on the construction of cogeneration units dispersed phase out coal-fired boilers. 2014 Pudong District, will complete the transformation of 160 coal-fired boilers Recently, the district held a coal-fired (heavy oil) boiler will work to promote clean energy alternatives, summed up the situation in our region to develop clean energy alternatives work in 2013, the deployment of the main work this year. Meeting was informed that, in 2014, the towns (industrial area), belonged to the company will accelerate the region natural gas pipeline network planning, heating network planning revision to develop industrial parks, to ensure that policies and funding in place, and take a variety of measures to ensure the successful completion of 160 units / sets of coal-fired boiler with 17 units / sets of clean energy alternative industrial furnace work this year. In 2013, our region continues to improve project access threshold, eliminate backward production capacity a total of 44, 159 to complete the clean energy alternative.

Gas steam thermal cracking reaction furnace gas steam oven should be carefully introduced reflect in the use, to guard against water, acid, alkali and leakage into the low boilers using the system, the system should be installed filters installed to prevent debris into various types, to ensure the purity of the oil . Gas and steam is easily oxidized during heating, the acid value of the oil is increased at high temperatures and a large change rate. Steam oven gas kinematic viscosity gradually increases, which is due to the thermal cracking gas vapor component at high temperature, thermal polycondensation reaction. Thermal cracking reaction resulting in generation of small molecule compounds, to reduce its viscosity; oxidation temperature when the inner conduit thermally cleavage occurs at 300 ~ 400 ℃, coke formation in the pipe, the inner wall of the device, leading to heat accumulation pipe affect the heat transfer efficiency, sludge poor flowability, transfer oil accelerated aging failure, but also to the furnace, pipes local overheating, impairing the mechanical strength of the threat to personal safety.

Steam boiler pressure controller function and debugging methods fired boiler, gas-fired boiler, high efficiency fired laundry steam boiler pressure controller and debugging method acting pressure controller is a pressure signal into an electric signal electromechanical conversion device, its function will be the high pressure or low levels of The electrical switching signal to the external circuit for automatic control or chain protection. Common pressure controller and pressure gauge, vapor pressure overpressure alarm can cut off the burner limit is reached; pressure controller adjusts single fire or dual fire burning the actual operating pressure; for large burner, the pressure may be adjusted according to the size of the size of the oil / gas, and always keep the pressure stable operation. Currently electrical contacts have been rarely used. Above the boiler pressure controller typically uses steam boiler pressure controller are used two to three pressure controller. Wherein a start and stop control furnace, for controlling a large and small fire conversion, there is used an overpressure protection. Two start and stop the boiler pressure controller is generally used to control the temperature controller, pressure controller is arranged to control the two-position and fire the boiler overpressure protection. Three safety accessories on the boiler must be in accordance with the procedures set two, which is intended primarily for safety. First, you can work to prevent another when one of them fails. Second, the purpose of comparison, in particular water level gauge and a pressure controller, to ensure safety, the operator to observe only one of which is the value indicated, but also controls the display shown two values ​​match. 3 generally require a pressure controller, operation is as follows: the first is a power adjusting; e.g. a small fire is set 0.5MPa, 0.4MPa furnace start, the adjustable screw -difference pressure controller (hysteresis) is 1, range (set value) is set to 5. The second pressure is shutdown, diffe set to minimum, range adjusted to 6 (0.6MPa). The third overpressure alarm is set at about 0.7Mpa. Note: the pressure differential must first be transferred back controller adjustment process, and then transferred range. Gas steam boiler pressure controller debugging, generally follow the principle: high pressure, is used as the overpressure protection; high pressure, as boiler start-stop control; low pressure, as a large and a small fire conversion. Specific pressure range may be adjusted according to the nominal pressure boilers and the requirements of use.