2 ton Low Price boiler Energy Saving Armenia

Fast 2 ton low price boiler energy saving armenia is committed to the development and manufacture of clean fuel boilers more than 20 years, annual investment of more than 5% of turnover on research and development of new technologies and new products; and production technology, enterprise system, workshop management have formed a relatively complete system and accumulated a rich experience, has become a priority choice for customers in mind.

Boiler house construction, arrangement of what issues need attention 1, hot water 2 ton low price boiler energy saving armenia should generally be installed in a separate boiler room built. 2, boiler room should not be directly in many people gathered on both sides of the room (such as public bathrooms, classrooms, auditoriums, shops, restaurants, waiting rooms, etc.) or at the top, bottom, or the immediate neighborhood of the main evacuation port. 3, if the boiler room is connected to the house or building provided in the multilayer room, semi-basement, the first or top layer, then it must meet the following conditions: rated outlet hot water (1) is less than or equal to the temperature of the boiler 95 deg.] C; (2) each boiler shall have over-temperature alarm device; (3) an oil or gas-fired boilers to be installed reliable ignition and flame protection program control device; (4) maintenance and periodic testing of each boiler safety accessories, alarms, chain protection devices to ensure that they are sensitive, accurate, and reliable; (5) semi-basements and basement boiler room require a safety evacuation channel. 4, boiler room should not be located in high-rise buildings, but the conditions required in their basement, semi-basement, first floor or in the top, shall meet the conditions of paragraph 3 of this Article, shall meet the following conditions, and approved by the provincial labor department boiler and pressure vessel safety supervision organization. 1) single boiler rated thermal power is less than or equal 7MW; (2) must be made with oil or gas-fired boilers; (3) over-temperature alarm should each boiler and chain protection; between (4) boiler building structure should have the appropriate proof measures. (5) A boiler can not be connected, (B) and (C) using the plant fire hazard combustible liquid, but if when connected to other production plant, the group which can be installed rated boiler outlet water temperature is lower than 120 deg.] C and the boiler room and the production plant are separated by a firewall. Waste heat boiler is not so limited. 5, fire resistance rating of the boiler room of the building and fire safety requirements should be consistent with "architectural design code for fire protection" and "fire protection design of tall buildings," the relevant provisions. Exterior wall or roof of the boiler room should be at least equivalent to the boiler room area of ​​10% of the relief area (such as: windows, skylights, weak walls, etc.). Not many people gathered here and the room to make a direct channel, containing flammable, explosive or other connected room dangerous goods. 6, the boiler room should meet the following requirements: (1) arranged in the boiler room of the apparatus should be easy to operate, and service access; (2) the boiler room should have sufficient light and good ventilation, as well as the necessary protection against freezing; (3) should prevent water boiler; (4) in the boiler room the ground should be flat without a step; (5) boiler load bearing beam members and the like, should be a certain distance from the boiler or take other measures to prevent damage to the high temperature. 7, each boiler room should be at least two outlets, are provided on both sides. The total width of the front end of the boiler (the boiler comprises a passage between the inner) does not exceed 12m, and the area does not exceed 200m2 single boiler room and to be open only one outlet. Leading to the boiler room doors should open outwards outdoor, during boiler operation, are not allowed to lock or latch to live. 8, operating locations in the boiler room, as well as pressure gauges, thermometers, flow meters, etc., should have adequate lighting. 9, since the conditions required for the rise in the basement or multi-story building, floor or the top floor when the boiler room is provided, each nominal thermal power of the boiler should be less than or equal to 2.8MW, and the rated water temperature is less than or equal to 120 ℃.

Steam 2 ton low price boiler energy saving armenia is one of the indispensable devices in the pharmaceutical industry, decoction of Chinese medicine, medicine drying, sterilization, cooking gum, drying, tabletting and capsule production processes, a large amount of steam will be used. West Libang Pharmaceutical Co., Ltd. is a pharmaceutical research and development, production and sales of high-tech enterprises, the existing anesthesia, cardiovascular, child immunization, pharmaceutical raw materials, pharmaceutical excipients, nutrition series of six automated production lines. With the increasing strength of China's environmental protection, some high-pollution devices are making the transition to clean environmental protection. Libang Pharmaceutical respond positively to national coal to gas policy, decided to change the existing coal-fired boilers to clean better gas steam boiler. Fast boiler with strong comprehensive strength in the field of clean energy, Libang Pharmaceutical after conducting comprehensive consideration, determined to cooperate with the fast boiler. The two sides further understanding, party fast technical engineers according to production needs state power, and soon its development of specific solutions for its recommendation of a 6 tons of steam condensing gas steam boiler (WNS6-1.25-Y.Q).

10 tph WNS series condensing gas-fired steam 2 ton low price boiler energy saving armenia project for chemical industry

The reaction link of Polymerization of epoxy resin has to be processed at an elevated-temperature, the heat source provided by the boiler is stable or not directly determines the products quality. Anhui Meijia New Materials Co., Ltd. is a fine chemical enterprise that specialized in powder coatings and epoxy resin, polyester resin R&D, production and sales, company listed in 2014 August in new over-the-counter market and it become China's first powder coating listed company.