Distributor 20t hot water boiler Industrial Vietnam

2.8MW WNS series distributor 20t hot water boiler industrial vietnam Coal-to-Gas project for Tulufanbei Railway Station

In November 2014, Tulufanbei Railway Station was put into operation with the official running of the Wuha section of Lanzhou-Wulumuqi High-speed Railway, which became a beautiful business card of Tulufan and promoted the development of the economy and society of Tulufan. Tulufanbei Railway Station covers an area of 10,000 square meters. With a height of 20 meters, the station can accommodate 3,000 people at the same time. As a piece of heat source equipment, the hot water boiler plays an important role to ensure the comfortable waiting environment.

Operation points premix condensing boiler which, when using condensing boiler, because it takes a special principle advantage of the water cycle, etc. which have some of the heat exchange so as to achieve the desired purpose. Although one condensing boiler price is not too high, and is very simple in operation, and has a good safety performance and so on, but during the operation, the following points need to pay attention to several aspects. First, to do preparatory work before the long-term use is not running or new premix condensing boiler, before starting again with water to clean inside the system, it is extremely important for the preparation of a condensing boiler is, for the next the operation will have a role of great help. And condensing boiler manufacturer reminder should be done in the right order at the time of the official launch of, for example, to open the first circulating pump can ignite. Second, to control the operation of all the details of the process of condensing boilers run them to be able to make it work better, should be kept inside the boiler pressure always is in a stable state, and to control the temperature inside the well, so feel free to do monitoring and surveillance found that there should be any changes to certain adjustments. And condensing boiler manufacturers stressed the need to always put the pipe network in the gas discharged to go, so you can prevent vaporization of good, but also regularly carry out sewage work and to be a reasonable allocation of water inside. Third, to control the pressure in the boiler if the use of the process premix cast aluminum condensing boiler suddenly found liter high pressure inside the boiler, you should immediately identify the reasons, usually because the water temperature is too high gas of caused, so it should be appropriate to reduce the water temperature to solve this problem. There is probably because it did not deal with the dirt is clean and lead to clogging and should therefore be timely to do clean-up work in this area. But if you find a sudden drop in pressure between the condensing boiler, then it should be timely to add water to the boiler, because this is mainly due to lack of water caused. These are the aspects of the operation points premix condensing boiler included, in addition, it should give a rather regular boiler blowdown work, this can be good to avoid accumulation of dirt on the inside and cause clogging phenomenon. And in the process of condensing boiler running, it must control the water and return water temperature difference, the temperature should be controlled at less than 30 degrees, otherwise there will be some security issues.

3.Preparing electricity based on requirement,

4.Installed boiler as manual,

March 26, 2018, fast Boiler Marketing Summit successfully held in Anyang, excellent strategic partner dealers across the country gathered in beautiful surroundings Huan Gulf Hotel venue center, witnessed ups and downs square almost 20 years, complicity future development plans.