14t h oil and gas fired boiler n chemical engineering

When the weather gets colder and colder, people will choose different ways of heating, one of which is more convenient is the fuel-fired 14t h oil and fired boiler n chemical engineering, but many people do not understand his use, so take a look at the following. Classified oil-fired boiler is a kind of boiler with many kinds of oil such as diesel oil, waste oil and so on. Its general structure and arrangement are similar to coal-fired boiler, and the common classification is mechanical type and steam materialized type. The characteristics of the bottom of the oil-fired boiler are to make the bottom of the furnace inclined to the back wall, which is the bottom of the heat preservation furnace, in order to obtain good combustion characteristics. This kind of boiler, for those who don't have a natural gas pipeline, Hope the boiler can run normally low cost, then the fuel-fired boiler is a very good choice. The fuel-fired boiler is an important symbol of the progress of the times, in order to serve the human being well and further perfect according to the needs of the people. Oil-fired boiler is designed in accordance with certain commercial standards, to a certain extent to ensure the excellent boiler, but also to a certain extent to improve the heat absorption strength of the boiler, then how should we use it? Design problems according to the oil-fired boiler inside the design of the boiler inner tank is larger, can store steam will be corresponding to more, suitable load capacity will become stronger, can be To meet the needs of different users, the cleaning of internal gall is also more convenient. The fuel-fired boiler with fire tube structure adopts the structure of triple-reflux fire tube, and the flame burns in the combustion chamber with high thermal efficiency, energy saving and consumption reduction, so it is economical and convenient to use. According to the unique design of the boiler, the use of the oil-fired boiler needs to find a set of operation steps suitable for the boiler and give full play to its function.

The 14t h oil and fired boiler n chemical engineering is a oil and gas fired boiler and is steam boiler whose steam capacity is 15 tons per hour. And the boiler could burn the fuel such as natural gas, light oil, heavy oil, blast furnace gas.

In the near future, at home and abroad more than hazardous chemicals, major accidents have occurred, causing casualties and property losses. Is a profound lesson, Henan Energy Regulatory Office will co-Provincial Development and Reform Commission issued the "Notice on alternative transformation of the province's coal-fired power business major hazard (liquid ammonia tank)" and actively promote the province's power industry ammonia tank alternative transformation.

"National Development and Reform Commission and the National Energy Board to implement the views on the promotion of electricity reform and development of the field of safety of" clearly "to strengthen the major hazards source control, there are significant hazards during the production of coal-fired power generation enterprises should study the implementation of major hazards alternative rehabilitation programs. " Henan Province TV as fire, liquid ammonia tank safety risk management and control situation is grim. To actively implement the "opinions" requirements, Henan Energy Regulatory Office investigation and carefully combing the province's power industry the basic situation of major hazards, and actively carry out reconstruction work research initiative to communicate the situation with the Office of the Provincial Development and Reform Commission, the provincial emergency management, efforts to promote reconstruction work as soon as possible. "Notice" requirement province of the power generation enterprises should further enhance political stance, overcome difficulties, vigorously promote the major hazard (liquid ammonia tank) and Improvement, under the premise to ensure safe production, the province's coal-fired generating units and strive to 2020 in liquid ammonia tank renovation completed before the end of December. New coal-fired power generation projects should all use the technical route no major hazard.

Next, Henan Energy Regulatory Office will replace liquid ammonia around the transformation as an important safety regulation. For failure to complete the transformation of liquid ammonia replacement power companies, to be included in the list of key regulatory target, for there are significant risks or accidents in accordance with regulations to be strictly punished according to law, and urge enterprises to strictly implement the main responsibility to effectively prevent accidents, efforts to increase intrinsic safety level of the enterprise.

The main components of organic heat 14t h oil and fired boiler n chemical engineering burner natural gas burner 5 is constructed of the following system components: 1, the function that the air supply system, air supply system into the wind speed a certain amount of air to the combustion chamber, the main components are: shell body, fan motors, fan impeller, air guns fire tube, damper controller, damper baffle, a cam adjusting mechanism diffuser plate. 2, the ignition system functions in that the ignition system ignites a mixture of air and fuel, its main components are: the ignition transformer, the ignition electrode, a high voltage electrical cable fire. A more secure electronic ignition system called ignition pulse, is widely used Zhuoyi energy and other natural gas boiler manufacturers. Which facilitate saving, you can simply press a finger, and safe, does not occur due to unexpected accidents occur flame, once the stall state occurs, the control system can close the solenoid valve, off gas passage 3 days , system monitoring function monitoring system is to ensure that the burner safe and stable operation, the main components are flame detectors, pressure monitors, temperature monitors and the like. 4, functions of the fuel system of the fuel system is to ensure that the desired fuel burner. The fuel oil burner system are: tubing and fittings, pumps, solenoid valves, nozzles, heavy oil preheater. Gas burner mainly a filter, pressure regulator, solenoid valve, and then firing solenoid valve, the fuel valve. 5, electronic control system electronic control system command center and the focal the above system, the primary control element is a control box, with different programmer for different burners, the common programmer has: LFL series, the LAL series, LOA series, LGB series, the main difference is the time of each different program steps. The controller 1, ultra Encyclopedia Chinese LCD display, built-in luminous incandescent lamp, regardless of the day night, the screen clearly visible. 2, the image level animation display state, condition, valve status, alarm status, operation of the boiler at a glance. 3, CPU intelligent central processor, all the programs focused on a digital chip, scalability, high degree of automation, simple, and powerful. 4, includes a time setting, temperature setting, setting valve, a continuous setting, timer setting, and other control functions pressure setting, arbitrarily set the working state. 5, includes a low level alarm (anti-dry function), ultra high temperature alarm, alarm and other ultra-high pressure alarm and chain protection (shutdown), eliminate safety hazards. 6, detailed self-diagnosis, record, store alarm information, enables ready access to an alarm condition, easy inspection and maintenance.