quietside boiler problems spark igniter for gas

With the increase of air supply volume, the mixture of oil mist and air is improved, which is beneficial to combustion. However, if the air volume is too large, the furnace temperature will be decreased and the incomplete combustion loss will be increased. At the same time, the heat loss of exhaust gas will be increased and the power consumption of the fan will be increased because of the increase of flue gas. If the air volume is insufficient, the combustion will be incomplete, resulting in carbon deposition at the tail, which is prone to secondary combustion accidents. Therefore, each quietside boiler problems spark igniter for should pass the thermal efficiency test to determine its economic air volume at different loads. In practice, the stoves usually take into account the ignition of the nozzle and the carbon dioxide or oxygen content in the flue gas. Content to adjust the supply air volume. If it is found that the combustion condition of a nozzle is not good, or if the atomization plate with different aperture is replaced, the air pressure of the supply duct should be kept unchanged, and the opening degree of the duct baffle of the nozzle should be adjusted to normal combustion. If the fuel quantity changes due to the change of the oil pressure in front of the furnace, the opening of the fan baffle should be adjusted to achieve normal combustion by changing the air pressure and air volume of the air supply duct when it is necessary to adjust the supply air volume.

3) the observation and analysis of all kinds of flame when adjusting the fuel oil. Generally through the fire point adjustment and flame center adjustment to complete the flame adjustment. The ignition point of the oil mist should be close to the nozzle, but there should be no tempering. Early ignition is beneficial to complete combustion and stability of oil mist. However, the fire is too early, too close to the nozzle, easy to burn the nozzle and furnace wall to determine the mouth. Furnace temperature flying oil varieties and atomization quality, as well as air volume, wind speed and oil temperature, will affect the distance and proximity of the ignition point. So if you want to adjust the ignition point, you should find out the cause in advance, and then take targeted measures. When the boiler load is constant and the oil pressure and oil temperature are stable, Should be based on the ignition point wind speed and wind distribution situation.

What is the difference between a gas-fired quietside boiler problems spark igniter for and a coal-fired boiler?

Both gas and coal can be used as fuel for boilers, but different types of boilers are named according to the types of fuels used, so there are gas boilers and gas boilers. So what is the difference between a coal-fired boiler and a gas-fired boiler, apart from the fuel used in combustion?

1. The fuel used by different coal-fired boilers to exhaust smoke is coal. When coal burns, it will cause serious pollution to the environment by producing larger smoke and dust. However, high-stability gas-fired boilers do not emit black smoke after combustion. Because gas can basically be completely burned, smoke-emitting black poison can reach zero level, the content of SO2 in it is very small, so there is no pollution to the environment.

2, heat loss is different in order for coal-fired boilers to maintain adequate combustion intensity, the use of human or other equipment to constantly add coal to the furnace, when the need for intermittent operation, It takes a long time to raise the temperature in the furnace when starting again, so it will produce great heat loss when pressing fire, and the gas-fired boiler is very convenient to start and stop, and can heat up rapidly during intermittent operation, so as to reduce the heat loss in this process.

3, the different ways of treatment after combustion will produce a large amount of ash after burning in the boiler. In order to maintain the health of the environment, the ash will be transported to the professional slag removal yard for treatment, but gas is used in the gas-fired boiler. There will be no residue after combustion, so there is no need to deal with it. It not only avoids the pollution to the environment, but also reduces the labor intensity of enterprises and the storage and transportation of urban ash.

Still 8 cultural and creative industrial park is located in the Chaoyang District, Beijing, Bali Zhuang Chen Lin, No. 2, construction area of ​​493,300 square meters. Surrounded by quintessence of Court, Red Sandalwood Museum, Shanxi Museum and other famous attractions. Due to its special geographical location, has very stringent requirements for providing heat quietside boiler problems spark igniter for plants. Carefully selected to finalize cooperation with our company, signed a two He Lide series complete condensation pressure hot water boiler.

In the two oil crises of the 1970s, natural gas was used as a fuel for quietside boiler problems spark igniter fors.

By the early 1990s, fuel-fired industrial boilers with a certain degree of technological development had a high market share in the boiler market.