Cheap Commercial 4t Natural Gas boiler Turkey

In accordance with article 1.2 13.3.6 to 13.3.8 "cheap commercial 4t boiler turkey design specifications" (GB50041-92): gas-fired boiler provided in the other buildings should be not less than 3 times the amount of ventilation, ventilation hour It does not include the amount of combustion air volume. Dangerous operating room and the like between the gas regulator, the amount of ventilation per hour, should be less than 3 times, when not meet the requirements natural ventilation, mechanical ventilation should be provided, and should be less than 8 air changes per hour accident ventilation times. Fuel pump and reservoir 45 ℃ flash point less than the underground tank of combustible oil, except that natural ventilation, the fuel pump mechanical ventilation 10 air changes per hour should times, six times per hour ventilation should depot mechanical ventilation. The above three are in each room in order to ensure exclusion of air and flammable hydrocarbon disposed a predetermined minimum ventilation rate.

What is the difference between the gas cheap commercial 4t boiler turkey and coal-fired boiler? Whether gas or coal can be used as fuel for boilers, however, named according to the type of fuel used for different boilers are not the same, so there is such a different type of gas boilers and gas boilers. So both types of boilers in addition to the fuel used in the combustion is not the same, between the coal-fired boilers and gas boilers, what difference does it make? 1, fuel is coal flue gas of coal-fired boilers used in different, when coal combustion will have a greater smoke caused serious pollution to the environment, however, high stability of the gas after combustion boiler did not smoke exhaust, because the basic gas on can be completely burned, toxic black smoke can reach zero ringelman level, SO2 content of which is very small, so there is no pollution to the environment. 2, different heat loss in order to allow coal-fired boilers to maintain sufficient combustion efforts require the use of human or other device to stop adding coal-fired furnace, when the need intermittent operation, it takes a long time to start to increase again furnace temperature, it will generate a lot of heat when the pressure of the fire damage, while the gas boiler is very easy to start and stop, fast heating intermittent operation, thereby reducing heat loss in this process. 3, different treatment after burning coal combustion in the boiler will produce large amounts of ash, in order to maintain a good healthy environment need to transport ash to the professional field slag processing, however, gas-fired boiler using gas , there will be no remaining after combustion ash, there is no need to process it, not only to avoid environmental pollution also reduces the labor intensity and the amount of urban ash storage and transportation companies. This is more than some of the differences between the three coal-fired boilers and gas boilers. By introducing the above we can understand the essential difference between the two boilers can understand, it is because of gas boilers more environmentally friendly energy was gradually replace coal-fired boilers. However, if companies need to use this boiler, in order to advance understanding of the security needs of gas-fired boilers which have quality assurance.

Gas oil furnace pump selection and purchase points to consider: conducting oil furnace oil furnace gas this kind, because it is one of the website product, so the knowledge and understanding of the product, at least, should achieve a comprehensive and specifically this level, so as to learn to have a good effect. Moreover, this is the basic requirement, so the following, it is better to proceed immediately, thereby, improve our learning efficiency .1. Gas oil furnace, the use of the pump, what good measure? Gas oil furnace on the cheap commercial 4t boiler turkey, a pump energy saving, the pump energy is recommended to use four, because it can be recycled flue gas temperature. Further, on the main circulating pump, the flow rate can be appropriately increased, thereby improving the heat exchange efficiency inside the boiler, in turn, to achieve air and save energy both goals. 2. The expansion tank of gas conducting oil furnace, the oil level is much more appropriate? In addition, its purchase, to pay attention to what? Gas oil furnace in the expansion tank, the appropriate oil level, is two-thirds the height of the expansion tank, and, to ensure that overflow does not occur the problem. And the purchase of products, in general, is to consider the use area, manufacturers and service qualification, and the use of these requirements and the environment. Through them, to choose the right products.

Employees to the annual meeting full of plans for our programs are presented shine. Whether sporty side fast version of "Desert Camel" was full of rhythmic Allegro "golden rice bowl", it combines the efforts and achievements we have made in 2018, exceptionally exciting. There festive set in one of the nation's lasting appeal of traditional dance "dance together" and "unforgettable beauty heart", gives us the beauty of the impact.