gas fired heating boilers

With the increase of air supply volume, the mixture of oil mist and air is improved, which is beneficial to combustion. However, if the air volume is too large, the furnace temperature will be decreased and the incomplete combustion loss will be increased. At the same time, the heat loss of exhaust gas will be increased and the power consumption of the fan will be increased because of the increase of flue gas. If the air volume is insufficient, the combustion will be incomplete, resulting in carbon deposition at the tail, which is prone to secondary combustion accidents. Therefore, each fired heating boilers should pass the thermal efficiency test to determine its economic air volume at different loads. In practice, the stoves usually take into account the ignition of the nozzle and the carbon dioxide or oxygen content in the flue gas. Content to adjust the supply air volume. If it is found that the combustion condition of a nozzle is not good, or if the atomization plate with different aperture is replaced, the air pressure of the supply duct should be kept unchanged, and the opening degree of the duct baffle of the nozzle should be adjusted to normal combustion. If the fuel quantity changes due to the change of the oil pressure in front of the furnace, the opening of the fan baffle should be adjusted to achieve normal combustion by changing the air pressure and air volume of the air supply duct when it is necessary to adjust the supply air volume.

3) the observation and analysis of all kinds of flame when adjusting the fuel oil. Generally through the fire point adjustment and flame center adjustment to complete the flame adjustment. The ignition point of the oil mist should be close to the nozzle, but there should be no tempering. Early ignition is beneficial to complete combustion and stability of oil mist. However, the fire is too early, too close to the nozzle, easy to burn the nozzle and furnace wall to determine the mouth. Furnace temperature flying oil varieties and atomization quality, as well as air volume, wind speed and oil temperature, will affect the distance and proximity of the ignition point. So if you want to adjust the ignition point, you should find out the cause in advance, and then take targeted measures. When the boiler load is constant and the oil pressure and oil temperature are stable, Should be based on the ignition point wind speed and wind distribution situation.

Not the indoor air clean, but also to contribute their efforts to reduce the haze of it. Using electric fired heating boilerss, not only saves space, but also as a make beautiful furniture, beautiful and seductive. Electric boiler, electrical energy is directly converted into heat energy, fast heating, thermal conversion efficiency is close to 100%. With conventional heating methods is very significant energy saving effect. Electric boiler to meet intermittent heating, the temperature of the room thermostat can be detected, so that the indoor temperature gradually changes, obvious energy saving effect. Low operating costs electric boiler, electric boiler heating encourage full use of national electricity policy. Operating costs compared to other air conditioning equipment, gas and other cheaper by 20% -40%.

As a leading steam fired heating boilers manufacturer in China, ZG Boiler keeps manufacturing high quality industrial steam boiler for all industrial area. Among one of IBR steam boiler manufacturers, ZG Boiler researches, engineers, manufactures and sells industrial steam boilers for a wide range of commercial and industrial applications. Different division, different steam boiler. For example, because of different fuels, our main products can be IBR biomass fired steam boiler, IBR coal fired steam boiler, IBR gas fired steam boiler, IBR oil fired steam boiler, IBR CFB steam boiler, etc. Those IBR steam boilers also can be divided into single drum steam boiler and double drum steam boiler. Our honestly consumers can choose horizontal steam boiler and vertical steam boiler. Here, as a IBR steam boiler manufacturer in China, I wound like to introduce IBR steam boiler in fuel difference.

In October 2016, my company and the China Dunhuang International Hotel signed a ZWNSL2.1-1.0 / W-Y.Q vacuum condensing gas hot water fired heating boilers to provide heating and hot water for the hotel. The boiler implementing the response to the national policy of environmental protection requirements and local environmental protection departments on a series of low nitrogen emission standard boiler requirements, in terms of design, manufacture, installation and other sectors have strict checks to ensure that the boiler safe and stable operation.