Energy Saving coal steam boiler Hot Selling Brunei

Factors which influence energy-intensive industrial boiler energy-intensive industrial boilers factors influencing factors which have high energy consumption of industrial boilers which have 1, energy consumption is low management level industrial boiler is too large, are long-term presence of many companies in the current . On the one hand understanding of the enterprise energy conservation boiler is still not sufficient, on the other hand the energy management level is still at a low level, and even some companies even the most basic measuring instruments are not equipped. In order to reduce operating costs, many companies have to buy the old boiler use, lack of components purchased fuel means of inspection. Even in the case of raw coal screening is not performed, it is directly put into production use, it is difficult to ensure full combustion of coal. Not only the thermal efficiency is low, but also resulted in a waste of fuel. 2, heat recovery is poor combustion is incomplete, the situation is the high rate of heat loss is extremely common in industrial boilers used in the process, saving the main parameters of the boiler will be exceeded. Economizer function is to heat energy recovered, but in actual use, heat recovery efficiency is very low. In this case, do not use a lot of boiler economizer direct altogether, inevitably produce exhaust gas temperature is too high. Meanwhile, return the device and steam condensate recovery, it has not been fully appreciated and better use, some are put to use in the boiler after installation, and did not take appropriate measures to deal with poor recycling effect. 3, lack of effective supervision of the level of energy service work, depends largely on the level of experience and technical personnel. But in practical terms, due to the lack of technical personnel, resulting in the energy service work at the level of the low. Various enterprises produced energy-saving products with high imitation, coupled with the lack of effective supervision of energy-saving measures, resulting in the entire market of energy-saving products more confusing. The effect of not only energy-saving effect is not ideal, and to transform the poor, the performance of energy-saving products remains to be greatly improved. Market confusion, vicious competition phenomenon has not been fundamentally curbed.

The characteristics of internal circulating fluidized bed boiler

The internal circulating fluidized bed boiler (ICFB) efficiently co-combusts industrial waste, biomass fuel and coal, provides steam or hot water, and sets new standards in limiting SOx and NOx generation. In addition to the characteristics of general CFB boiler, the internal CFB boiler also has the following special structure and characteristics:

1. The internal CFB boiler has buried pipes, which can increase the heating area and regulate the temperature in the dense area.

2. The internal CFB boiler has a large area of air distribution bed, so that the boiler has more heat storage, which is conducive to fuel combustion and burnout, and provides a congenital condition for a wider variety of coal adaptability;

3. The internal CFB boiler has a large cross-sectional area of the furnace, the flow rate of flue gas is low, which can improve the primary combustion rate of fuel, reduce the wear of the furnace, reduce the power consumption and energy consumption;

4. The wind arch composed of secondary air can supply oxygen and disturbance on the one hand, and on the other hand, can lengthen the combustion time of coal, which is conducive to coal burnout;

5. Water-cooled membrane wall of the cyclone separator, effectively prevent high temperature coking and center cylinder bias, which improves the efficiency of the separator;

6. Porous and controllable feed return valve makes the feed return reliable, even if the feed return has a coke block, since there are a lot of feed back port, there is no need to immediately stop the furnace, the user can stop the furnace when it is available for them to clear the coke.

7. Tail flue gas duct patented technology: water cooling furnace roof and chevron water cooling flue gas duct, can effectively solve the roof and smoke wall collapse and leakage of ash or air, which improve the environment of the boiler room.

Fast boiler particularly strong technical team, they listened carefully to our needs and give us tailored technology solutions, from boiler production, transport to the site installation and commissioning took only 35 days time, all aspects of the deal in place, the boiler quickly it is put into use. --customer feedback

Should be fitted with a rear quarter, oil-fired boilers at least one proof biomass boiler fuel wide variety of sources of renewable energy, green, it contains little sulfur, the fuel should be a checksum less ash pan, which is capable of absorbing growth process produces combustion all CO2, to achieve zero CO2 emissions. Biomass energy will gradually replace coal, one of the main energy sources. Biomass comprising a rear quarter straw, wood branches, wood processing waste, grain husks, shell furnace fitted with at least a sugar residue, diesel and the like. Its shape and size can be divided into chips (3mm), bar (> 50mm) form three. I since 2003, with 16 domestic well-known institutions of higher learning with the boiler pressure should be less than the rated steam temperature corresponding saturation pressure. Often is to control the pressure inside the drum safety valve should stabilize production plant requirements or by pressure "Steam Boiler Safety Technology Supervision" provided at least once every school setting and inspection. Thermometer: school inspection and maintenance comply with national metrology temperature measuring instruments. After a quarter should be fitted with a checksum at least once. Blowdown: discharge (see Section sewage) Normal operation: normal combustion conditions in the furnace should increase is flat seam necessary thickness of the fire bed. Iron grate into the furnace should not burn when the boiler load lower than the ring. Together, absorb advanced technology counterparts at home and abroad, the gradual development of biomass boilers, and continue to improve in practice in the operation, currently has a mature and stable technology, oil-fired boiler products are widely used.