Personnel to operate the boiler high efficiency 2 ton price georgia operation is necessary for the correct installation and use precautions safety valve.

Installation Notes

1, rated evaporation> 0.5 ton steam / hr gas boiler, at least two safety valves installed; Rated evaporation ≤0.5 steam tons / hr gas boiler, mounted on at least a safety valve. The separable exit of the economizer, steam superheater outlet of the safety valve must be installed.

2, the safety valve should be mounted vertically in the boiler drum, at the top of the header. Between the valve and the drum or header, not equipped with access to the steam outlet pipe and the valve.

3, the lever-type safety valve should prevent movement of the self-apparatus and the weight limit leverage deviant guide tube, a spring safety valve should lift and handle means for preventing movement of the adjustment screw is screwed lightly.

4, the rated steam pressure ≤3.82MPa boiler safety valve throat diameter of not <25mm; the rated steam pressure> 3.82MPa boiler safety valve throat diameter of not <20mm.

5, the safety valve and boiler tubes, which cross-sectional area not less than the cross-sectional area of ​​the valve inlet. If several valves installed together with a short tube directly connected to the drum, short tube passage area not less than 1.25 times the area of ​​all the exhaust valve.

6, the safety valve should normally be installed exhaust pipe, exhaust pipe should be through a safe place, and there is sufficient cross-sectional area to ensure the smooth flow of exhaust. Safety valve exhaust pipe at the bottom should be fitted to the safe location of drainage pipe, the exhaust pipe and drainage pipe not allow the installation of the valve.

"APH T6" boiler high efficiency 2 ton price georgia circuit to meet the various needs, select single or series and parallel, with the use depending on the circumstances. Premix combustion technology with technology and wings, by fine adjustment control, to promote efficient mixing of gas and air, the combustion more fully, more efficient, suppressing the generation of NOx from the source. Beijing new boiler The boiler NOx emissions less than 18mg / m3, well below the most stringent in the history called "boiler air pollutant emission standards" under the implementation of emission limits 30mg / m3 of.

Dial firearms When caking coal combustion chain grate boiler high efficiency 2 ton price georgia slagging combustion zone Seam is a common occurrence. This requires a fireman who frequently beat palladium, beaten clinker, improve combustion, reduce oven

Steam boiler high efficiency 2 ton price georgia water treatment method and characteristics of steam boiler water treatment methods have the furnace and the furnace is also known as points outside of the pot and the pot. Generally for soft drinks dual steam boilers and boiler greater than 2t / h, the furnace should be used for chemical water treatment, and vice versa may be provided only steam boiler furnace dosing process, but by other means, to ensure the required quality assurance quality. Mainly refers to treatment furnace before entering the steam boiler feed water, wherein the softening treatment in order to remove the hardness of the drop base and carried out, desalination and other water treatment. At present, the use of ion exchange water treatment method. Ion exchange softening method is not scale forming ions certain ion exchanger, will be readily scale formation of calcium and magnesium ions in water displaced, so that the water is softened. Ion exchange softening, steam boiler feed water hardness can meet the eligibility criteria. Ion exchanger is divided into two major categories of inorganic and organic. The core particle structure of the inorganic ion exchanger dense surface exchange only, a softening effect is poor, it is now rarely used. Particle core loose structure of the organic ion exchangers, not only the exchange reaction on the particle surface, and simultaneously inside the particles, good softening effect. A polymer compound is now commonly used synthetic resin ion exchangers, its content with all kinds of ions, hydrogen ions and sodium ions into two kinds. Thus, the ion exchange softening process can be divided into sodium softened, partially softened sodium, potassium and hydrogen ions softening - sodium ions and other softening, steam boilers generally used the first two methods.