Cheap hot water boiler Commercial 2t Cambodia

The steam boiler can't add water to the furnace. What should we do? In the face of this situation, first of all, we should know whether the local water quality is too hard, and there are many places where the water quality is hard over a large volume of water and scale, resulting in the blockage of pipes in steam boilers and the serious possibility of pipe burst. If a steam boiler produces scale due to excessive scale, the heating area of the boiler will be affected, and there will be a large amount of water in the steam. The user said he had softened water equipment and there was no scale in the steam boiler. There should be something wrong with the check valve, and when it opens, it is true that the check valve is stuck in something, and after it has been removed and rinsed with clear water, it will be normal. The water has been added. In the future, use friends to meet this situation, please choose to see if the scale is too much of the pipe blocked, and also to see if the check valve is stuck in something, I hope this content can help to meet this related problems of friends.

How gas cheap hot water boiler commercial 2t cambodia gas hot water boiler installation pipeline installation, first select the qualified product, then follow the steps for installation and commissioning reasonable, it can allow the boiler to function properly, to achieve the desired effect and the effect of the installation. The following major steps to introduce hot water boiler pipe installation: 1, water supply pipeline installation, the device should start pipe ends, pipe connection to the device on the basis of outwardly extending, and note installed below the heating pipe. 2, the hot water pipe installation, the installation should have a certain slope in the same direction with the hot water flow. Exhaust valves disposed highest point, surface drains connected to the drains. Lowest point set trap, guarantee easy operation. 3, installation sewage pipes, sewage pipes and valves and equipment are connected by external flanges, all welding. Pipe elbow should be used sparingly.

Flameout protection device is a flame detector and the solenoid valves and other components, when the solenoid valve (no explosion) should not be in direct contact with the gas, flame protection means shall also include a pneumatic valve controlled by a solenoid valve, is a flame monitoring Safety Devices the key device; flame detectors currently used are mainly two: one is monitoring the UV flame, such as UV-sensitive tube; the other is the flame by a conductive flame be monitored, such as ion monitoring needle. 3: safety devices to reduce the damage in order to reduce the extent of damage to the furnace and flue gas when mixed explosion, coal-fired boilers must be installed after Burning gas blast doors, blast doors by area and volume of the furnace flue select and comply with the relevant predetermined, and generally 0.025m2 / m3, explosion-proof doors shall be installed easily explosion venting of the furnace, especially in flue gas flue is difficult to avoid the blind spot, the corner, top nausea and other combustible gases tend to collect stagnant regions are most prone to explosion site.

At the end of 2017, China Guodian is located in Jiangxi Province Wanan Hydropower Plant After evaluating the situation, some of the steam boiler used to purchase much-needed daily work. Sales Manager fast boiler combined with the actual situation of the power plant for its recommendation 2 0.5 tons of electrically heated steam boilers.