The partnership, fast boiler for the user responsible attitude to have left a deep impression on our fireman boiler operation is not very skilled, fast deliberately sent a party of professional and technical personnel for our on-site supervision of installation, commissioning and training to ensure that the latter can operate our good boiler fireman. --customer feedback

How to choose the right boiler steam solenoid valve tips? Solenoid valve is used to control automation infrastructure element the direction of flow, is actuator; commonly used in industrial machinery and control valves used to control the direction of the medium, so as to achieve the vapor solenoid valve control solenoid valve switch operating principle of the currently used usually over two steam: 1, horizontal fired steam boiler exported to thailands - saturated steam temperature and pressure is relatively stable at temperatures below 250 deg.] C, lower than the working pressure 1.6Mp. It can be widely used in textile, printing, chemicals, plastics, rubber, pharmaceutical, food, building materials, machinery, electronics, surface treatment and research departments as well as bathrooms, dining room, air conditioning and other automatic control system. 2, out of the steam power plant - superheated steam temperature high base pressure changes, temperature up to 400 or more, lower than the working pressure 4.0Mpa. Typically use seal steam solenoid valve broader generic media can be used separately in water, light oil, heavy oil, non-corrosive fluid such as gas and steam. The exhaust system of plant extraction duct draining system and an evaporator, the main medium in the pipeline and a remote two-position automatic adjustment control.

Combustion Adjustment of dual-use oil and gas boilers (Skills) boiler firing was successful, the load can be adjusted to normal operation. At this point, we should always observe the furnace combustion, if there is a bad oil and gas atomization, beating the flame, the flame hit the furnace and the exhaust gas temperature is too high or too low and so, it is timely for oil pressure, oil temperature, of steam, wind, air pressure, steam pressure hanging line adjustments to ensure safe and economic operation of the boiler. Size and load size of hydraulic, pneumatic boiler related to the oil pressure adjusted by adjusting the back pressure or fuel burner to achieve the size, by adjusting the air pressure to achieve the degree of opening of the valve. Adjust the amount of oil, air pressure adjustment load, at the same time, air volume control, must be synchronized to ensure a reasonable match of oil and the amount of wind, so as to achieve economic operation of the boiler. 1, the combustion method of determining boiler fuel gas: C02 content is determined from the flue gases and excess air ratio (1) the combustion quality (2) determines the length of the flame from the combustion quality (3) from the flame color and smoke color determination 2 is good or bad combustion, fuel combustion boiler adjustment method: the normal combustion, furnace flame stability was white orange, generally rumble, or if the flame beating abnormal sound, should adjust the fuel and air volume. If the adjusted still no improvement, it should identify the cause flameout, the measures to be taken and re-ignition.

Industrial boilers will be changing due to the boiler Maximum Achievable Control Technology (MACT) standards that were finalized in December. What will this mean for manufacturers that use steam and utility plants, and what are the ramifications for the boiler industry at large.Oil, Process Gas and Solid fuel burning boilers will be subject to more Environmental Protection Agency (EPA) restrictions that will require retrofitting existing steam plants to make them compliant with the current boiler MACT standards.