How steam boiler and steam turbine cycle and constitute the weight of steel: steam boiler, the following is a question and answer form, to learn the boiler-related knowledge, understanding and a way to continue to progress in their learning on the road, and at the same time , we can continue to add their own expertise in this area. Thus, to achieve the proper use and rational use of the boiler, get good economic returns. 1. Move the steam boiler, it needs to record it? Mobile steam boiler, whether required to be recorded, to see whether it is greater than the boiler pressure 0.1MPa, and, if its capacity is greater than 0.25 cubic meters. So, on this issue, we can not give a specific answer, because they do not know these two particular aspects. In addition, we also need to know is whether the steam boiler needs for the record, not to see it is fixed or mobile, is to look at the pressure and volume of these two parameters. 2. The power plant, the steam boiler and turbine, how to form a loop to cycle power generation? Power plants, boilers and the steam turbine cycle is configured, for: first steam boiler to generate steam, and steam to the steam turbine. By rotating the steam turbine to drive generators. Thereafter, the exhaust gas turbine into the cold end of the condenser device, and condenses into water. In addition, the feed pump is fed by the condensate pump, then re-entering the boiler. Thus, a loop may be formed, and further, to achieve cycle power generation.

The contract is valued over €15 million and is set to be completed by the end of 2015. ZG will deliver one 135 MW steam turbine, with generator set and auxiliaries, including the water-cooled condenser for the coal-fired power plant.

Which areas of the structural characteristics of Henan steam boiler used mainly for: Henan steam boiler boiler very short time and efficiently reach operating temperature and pressure of the set, even in the replenishment process, there will be no temperature and pressure in the fluctuation. Automatic electric heating heavy fuel steam generators with automatic integrated operating system, automatic water, automatic replenishment, the top electrical steam generator arranged vertically mounted, can effect the thermal expansion and contraction scale is deposited on the electrical heating element under rapid peeling off. Mainly used in the food processing industry, packaging machinery industry, bio-chemical industries. 1, the water supply system throat automatic electric steam generator, steam drying steady flow supplied to the user. When the water into the tank, the power switch, controlled by the drive signal, high temperature solenoid valve is opened, the pump work, is injected through the check valve furnace. When the solenoid valve, the check valve is clogged or damaged, the water pressure reaches a certain overpressure valve through overflow back into the tank, to protect the pump. When the tank without water or residual air in the pump piping, air not only into the water, as long as the rapid exhaust through the exhaust valve until the discharge water, close the exhaust valve, the pump will function. The main water supply system component is the pump, they use a multi-stage vortex pump of higher pressure and a larger flow rate, using a small part of the diaphragm pump or a vane pump. 2, the central nervous system level controller is electrically controlled steam generator system, the electronic and mechanical divided into two categories. Electronic probe electrode level controllers by three different high and low control level (i.e., the difference in height level) so as to control the heating time of the water supply pump and the furnace heating system, working pressure is stable, broad range of applications . Stainless steel mechanical float level controller for generator furnace large volume, the working pressure is not stable, but easy to washable, maintenance and repair.

It is reported that Inner Mongolia has issued a "winning Blue Sky Battle three-year action plan to implement the program," out of shutting down 300,000 kilowatts coal-fired units of non-compliance. Vigorously promote the region's coal-fired units (excluding the circulating fluidized bed and "W" Flame Boiler) ultra-low emission transformation, by the end of 2018, Wuhai City and the surrounding areas all in-service thermal power coal-fired units basically completed the transformation; by the end of 2020 before, with the rest of the transformation of the conditions to complete the transformation of coal-fired power plants all. And promote the implementation of the transformation of ultra-low emissions and steel industries.

First, the implementation of dual control energy consumption. And vigorously promote the total energy consumption and intensity "dual control" to promote the reduction of coal consumption through energy saving. Earnestly implement the autonomous region, "" Thirteen five "comprehensive energy conservation program of work for carbon reduction" and "energy saving" Thirteen Five "plan", by the end of 2020, the region's total energy consumption control at around 225 million tons of standard coal, coal accounts the proportion of total energy consumption decreased from 82.9% in 2015 to 79% unit GDP energy consumption fell 14% from 2015. According to focus on the use of coal and clean use of principles, focusing on reduction of non-coal for electricity, increase the proportion of electricity from coal, coal power accounted raise the proportion of total coal consumption to around 55%.

Second, the development of clean energy and new energy. By the end of 2020, non-fossil energy consumption reached about 25 million tons. An orderly wind power and photovoltaic power generation projects, optimization of wind energy, solar energy development layout. Increase renewable energy consumptive efforts to solve the basic wind abandoned, abandoned light problem. By the end of 2020, the region consumptive wind power capacity has reached 45 million kilowatts, 15 million kilowatts of photovoltaic power generation reached.