Accessories szs system and boiler water tube boilers which (1) the fuel system the fuel system of pumps pumping fuel from the fuel tank to the day tank, is then withdrawn from the daily tank fuel pump, through a pressurized, heated, and sprayed into the filter oil atomization. This system is usually divided into the border daily service tank and oil supply system and fuel system. (2) feedwater, condensate water, steam condensate system piping system comprising pipes and valves and piping and other equipment from the deaerator. Steam system comprises a steam pipe and various valves. (3) the ventilation system features a ventilation system external air into the furnace for combustion of fuel, and the products of combustion (flue gases) discharged from the boiler to the atmosphere. In the process of air and flue gas flow, there will be a variety of flow resistance, if the natural ventilation generated by a chimney to overcome the resistance to flow, called natural ventilation. Obviously, this ventilation air flow generated is small, can be improved by increasing the height of the chimney natural ventilation. Using a fan to overcome the flow resistance of various ventilation systems, called mechanical ventilation. Mechanical ventilation is divided into positive pressure ventilation, ventilation and negative balanced ventilation. The so-called positive pressure ventilation means for sending air to the boiler and the flue gas discharged from the boiler to the atmosphere. Primer furnace boiler flue gas exhaust blower suction chamber, known as negative pressure ventilation. (4) boiler auxiliaries and monitoring instrumentation and monitoring instrumentation, boiler accessories boiler safe and economic operation are necessary, including: (A) as an annex to ensure the safe operation of the boiler: water level gauge, safety valve, pressure gauge and thermometer indicating steam parameters ; B) combustion supervision parts: pressure gauge, carbon dioxide indicator, oxygen table, smoking view mirror.

4 tons of fuel boiler Product description: 4 tons of fuel oil boiler is heated by a burner, fuel atomization effect, fuel combustion, can not see the chimney smoke, so the green fuel boilers, energy efficient. After spraying fuel through the burner into the furnace in the atomized droplets, and easily mixed with air and the rapid combustion heat flash. Compared with coal-fired boiler with the same capacity, and parameters, which furnace volume heat intensity may be increased about twice. But to reduce the thermal load of the burner zone, in order to avoid overtemperature waterwall tubes in this area, so the furnace volume is only reduced by about 1/3. Because the ash content of fuel oil is small, without slagging in the convection heating surface, it allows the furnace exit gas temperatures as high as 1300 ~ 1350 ℃, and narrow a pitch between the convection heating surface to increase the flue gas velocity, thereby increasing the heat transfer coefficient of the heating surface, the heating area savings and steel. Features: 1, the boiler burner automatic combustion control in accordance with instructions, stop, separate control box has a number of security, performance, security and stability, low maintenance. 2, the inner fire tube inserted spoiler retardant, smoke slow speed, to strengthen the heat exchanger, combustion heat conducting large extent to the water, the low temperature flue gas discharged from the smoke chamber, reducing heat loss and save fuel. 3, the water level sensor water level real-time monitoring, to continuously monitor the water level is normal furnace. While controlling the temperature and replenishment level sensor solenoid valves, the boiler water may be continuously supplied. 4, centrifugal multi-layer insulation glass wool, steel for packaging famous white color, heat loss, anti-rust appearance. 5, the product is widely used in hospitals, schools, hotels, hotel, bath center and other enterprises. Boot check: 1, various instruments, whether the instrument to confirm the adequacy of fuel tank, and the inlet valve is opened. 2, confirm the soft capacity and the water tank boiler water quality meets the requirements of the main valve is opened and boiler feed water inlet valve. 3, rotation of the oil filter to remove debris. 4, drain the remaining water in the boiler, while the opening operation of the low level alarm and chain. Boiling furnace process: 1, before the new boiler furnace should be boiled to remove impurities and dirt inside the boiler, or trisodium phosphate soda cooking oven may be employed to prepare a 20% concentration was added furnace (not note the solid directly into the furnace). 2, after closing the steam valve and the water table Hancock, opening the vent valve according to the procedure stoker firing power may be low heat and temperature rise at the beginning, when there is moisture in the furnace, close the vent valve when the valve is discharged from the vent, the furnace pressure is raised to be at around 0.1MPa, the boiler should be checked for leakage and various accessories such as fittings, if any leakage should be promptly fastened. 3, when the pressure in the furnace reached 0.3MPa, the normal shutdown program shutdown, let the furnace pressure decreased to 0.1MPa or less, the drain valve open, give up all the water in the furnace. 4, opening into the hole, rinsed with soft water inside the boiler until the washing water coincides with the degree of acid-base soft water, after closing and opening into the hole Hancock water gauge. 5, after the completion of cooking stove washing, all restore normal operation, before normal operation stoker.

Water tube boiler for cocoa factory

A 15-ton oil and gas water tube boiler produced by ZG boiler provides steam for cocoa processing. The plant is located in Côte d'Ivoire and requires a steam boiler for production due to the expansion of production.

Major scientific and technological innovation is the State of the weighing, State of the weapon must be firmly in their hands, we must rely on self-reliance and independent innovation. - Xi Jinping December 14, kicked off at the Third International Fair of Innovation and Entrepreneurship Center at the National Convention. As China's first international "double hit" Expo theme show to the world maker culture: power generation, focusing on innovation! Fast Boiler Co., Ltd., Henan Province, to participate as an outstanding representative of the exhibition, at the provincial delegation of the booth, the party fast low nitrogen product model boiler and remote monitoring system is placed at the front, leaders at all levels attach great importance to the domestic foreign passengers .