Factors which influence energy-intensive industrial manufacturers commercial 1t boiler cambodia energy-intensive industrial boilers factors influencing factors which have high energy consumption of industrial boilers which have 1, energy consumption is low management level industrial boiler is too large, are long-term presence of many companies in the current . On the one hand understanding of the enterprise energy conservation boiler is still not sufficient, on the other hand the energy management level is still at a low level, and even some companies even the most basic measuring instruments are not equipped. In order to reduce operating costs, many companies have to buy the old boiler use, lack of components purchased fuel means of inspection. Even in the case of raw coal screening is not performed, it is directly put into production use, it is difficult to ensure full combustion of coal. Not only the thermal efficiency is low, but also resulted in a waste of fuel. 2, heat recovery is poor combustion is incomplete, the situation is the high rate of heat loss is extremely common in industrial boilers used in the process, saving the main parameters of the boiler will be exceeded. Economizer function is to heat energy recovered, but in actual use, heat recovery efficiency is very low. In this case, do not use a lot of boiler economizer direct altogether, inevitably produce exhaust gas temperature is too high. Meanwhile, return the device and steam condensate recovery, it has not been fully appreciated and better use, some are put to use in the boiler after installation, and did not take appropriate measures to deal with poor recycling effect. 3, lack of effective supervision of the level of energy service work, depends largely on the level of experience and technical personnel. But in practical terms, due to the lack of technical personnel, resulting in the energy service work at the level of the low. Various enterprises produced energy-saving products with high imitation, coupled with the lack of effective supervision of energy-saving measures, resulting in the entire market of energy-saving products more confusing. The effect of not only energy-saving effect is not ideal, and to transform the poor, the performance of energy-saving products remains to be greatly improved. Market confusion, vicious competition phenomenon has not been fundamentally curbed.

Industrial manufacturers commercial 1t boiler cambodias and control systems of foreign countries: (1) is designed to not only focus on boiler heating systems also pay attention to both attach importance to the development and integration of hardware, pay more attention to the boiler control model and control software research and development; (2) pay attention to the reliability of the control device , economy, such as small oil, gas boiler still use many relays, contactors logic control; (3) control the boiler operation is fully automated, requires less or no operator; (4) larger capacity boiler widespread installation of combustion optimization system based on an online industrial control computer; (5) the use of group control technology while controlling put into operation and out of multiple boiler according to the actual load; the use of (6) information technology continues to improve, medium and small boilers can be transmitted via the mobile Internet managers to operate the boiler boiler operating conditions, overload alarm and other critical information, and to accept operator performs the operation command, the boiler operating data may also be connected to the building automation system via a local area network, the Internet ( BA), the wisdom of the factory system to go; (7) Internet-based remote monitoring system boiler was Development and application. Compared with the boiler control technology and equipment abroad, mainly in the following gaps: ① slow combustion control technology, especially coal-fired boiler combustion control technology development; compared to the presence of on-line monitoring and sensor technology for combustion control developed ② large boiler the gap; the presence of reliability and developed sensor ③ boiler combustion control, actuators and control equipment compared to a big gap; ④ light weight hardware-oriented software for boiler control there is the negative impact of technological development; ⑤ remote operation and control, monitoring system still in its infancy, there is a large distance away from the application; ⑥ majority control equipment still in operation control based on boiler safety level, based on a handful of boiler control equipment taking into account the number of energy-saving, environmental protection and performance of the system control. 3 standardized "Twelfth Five-Year" period, the standardization of industrial boilers has made considerable progress to revise the "Boiler Safety Technology Supervision" of TSGG0001 and TSGG0002 formulate "energy-saving boiler technology Supervision" as the starting point, through the development of core boiler product standard GB / T16507-2013 "water-tube boilers", GB / T16508-2013 "shell boilers", on the basis of gradually straighten out the boiler standards with international standards and further amendments, including one after another on the GB / T10180 "industrial boilers thermal performance testing procedures "and other issues involving the boiler and related components, ancillary equipment design, manufacture, use and inspection of industry regulations and standards 62 (six of which industry technical regulations, national standards and industry standards 30 26, see Appendix H) and universal implementation, technical specifications and standards revised on the basis of implementing the security, the energy requirements of the market fully reflects the principles and spirit of the WTO, which greatly helps regulate and improve the overall technological level of industrial technology and competitiveness of the industry.

Industrial electric steam manufacturers commercial 1t boiler cambodias, electric, industrial steam boilers offer much quote how much? Although natural gas steam boiler is mainstream, but as many local companies still need electricity steam boiler. So, in industrial production, there are still many places need to use electric steam boilers that do not have a specific price of industrial enterprises to fast boiler consulting industrial electricity steam boiler. In this regard, the pre-sales engineer fast boiler after a detailed understanding of the needs of the industrial enterprises to provide current data capacity, there is the production of steam required tonnage, so, to be able to be used for the enterprise the tonnage of the most accurate accounting, for which data fast boiler pre-sales engineer is given the industrial enterprises 2t electric steam boiler on it. The current price of the fast boiler models at around 180,000.

Shanxi Province to respond positively to treatment advice on remediation since 2014, new registrations of 10 steam tons / hour coal-fired manufacturers commercial 1t boiler cambodias and environmental supervision of the central group feedback, recently, government inspectors focus group, conducted a comprehensive inspection of coal-fired boilers activities, to grasp the progress and corrective measures to ensure the successful completion of the renovation work.

The statistics, since 2014, Datong new registered 10 steam tons / hour and a total of 48 coal-fired boilers, according to the provincial Bureau of Quality Supervision requirements, the county district special equipment related regulatory authorities have the 48 legally registered boilers Log off, and conduct regular inspections. As of to date, 36 units have been removed, still with 11 units, the remaining aspects of the transformation of a substance being born.

Currently, 11 boilers are still in use, some have been re-ordered natural gas boiler, gas pipeline work underway access; some have been able to replace air heating equipment; also because of the administrative division adjustment, need to further define the charge of the task.

Follow-up inspection staff proposed remediation work boiler suggested that there was any objection to the main regulatory responsibility, clear as soon as possible; dismantled boiler, strengthen follow-up supervision; boilers still in use, depending on the circumstances be accountable to county-owned enterprises; the ongoing transformation of the boiler, a clear transformation is complete to confirm compliance and acceptance of responsibility department, and follow-up supervision.