Classification of Oil-fired BoilerCompared with gas-fired boiler and gas-fired boiler, oil-fired boiler runs more economically than electric heating boiler and is more convenient to use than gas-fired boiler. With the development of economy and social progress as well as the improvement of people's awareness of environmental protection, coal-fired boilers are gradually out of sight because of serious pollution. Instead, they are replaced by new types of environmental protection digital boilers, such as electric heating boilers and oil-fired boilers. Gas-fired boilers, such as gas-fired boilers, are the most expensive to operate, gas-fired boilers need to be opened with gas pipelines, then, if there is no natural gas pipeline, and hope that the operation cost of the boiler is low, only the choice of fuel-fired boilers. Fuel-fired boilers are heated by burners, and fuel-fired atomization effects Good fuel combustion, smokestack can not see black smoke, so fuel-fired boiler green, efficient and energy-saving. Oil-fired boilers include oil-fired water boilers, oil-fired cheap energy saving hot water boiler kuwaits, oil-fired heating boilers, oil-fired bath boilers, oil-fired steam boilers and so on. Oil-fired boilers are boilers fueled by light oil (such as diesel oil, kerosene), heavy oil, residual oil or crude oil.

Zhengzhou Sunrise Optoelectronics Technology Co., Ltd. by the Dongxu Group, Henan Province, the state-owned asset management companies and Zhengzhou Investment Holdings Limited jointly made, mainly engaged in flat panel display and solar industry design materials, manufacturing and sales operations. Sunrise Optoelectronics project has been put into a production line, the second phase will continue the expansion, three new production lines to meet the production needs of Project Phase II, Sunrise Optoelectronics urgent need to increase new boiler equipment. After investigation and screening of a number of boiler brands, determined to cooperate with the fast boiler, steam signed a 10-ton integrated condensing gas steam boiler (WNS10-1.25-Y.Q).

Electric power operation a steam boiler steam boiler flame condition is a kind of power for energy conversion from electric energy into thermal energy, the hot water or organic heat medium (HTF) is heated to a certain parameters (temperature of the boiler through the heat exchanger portion, pressure) and externally output has a nominal thermal Machinery working fluid. The use according to electric boiler can be divided into: KS-D electric water boilers, CLDR (CWDR) electric boiler (including an electrical heating bath boilers and electric boilers), LDR (WDR) electric steam boiler. Electric steam boiler in the process of running, fireman personnel to observe the combustion flame, burning flame can burn if fully reflect fully, a number of other accessories such as whether there is a problem, then the fireman can be carried out according to the boiler combustion flame swap, in order to reach the normal combustion. If the flame exhibits electric steam boiler combustion yellow-orange, with neither white nor black smoke bright and clear outline, surrounded by non-sparking, fire smoke color other than transparent; size and shape of the flame at high fire to substantially fill the chamber but the phenomenon of flame swept and peripheral heating surface does not appear. In the case where the oil temperature, oil pressure requirements are met, such as the Mars entrained in the flame, it is possible that nozzle clogging. When the atomization uniform, the local flux density is too large, the presence of coarse particles or droplets, can see the flame root few black stripe, snow flake peripheral flame Mars large droplets combustion. If there is incomplete combustion of carbon black and outer combustible gas flame, the flame and smoke in rewinding the tail and around the flame, smoke opacity. Here the air volume should be adjusted, with the wind flame-inspection position of the disc, to remove the nozzle may hit coke.

The main characteristics of the indicators boiler What? To demonstrate configuration, capacity, parameter and economical operation of the boiler, etc., generally represented by the following indicators to the basic characteristics of the boiler. A) evaporation industrial boilers evaporation is generally 0.1 ~ 65t / h. For the cheap energy saving hot water boiler kuwait with a nominal thermal power of its capacity to indicate the size, in units of MW. (Ii) pressure and temperature for saturated steam production boiler, just indicate steam pressure. For the production of superheated steam boiler, the steam temperature of the steam must be marked at the outlet of the superheater, i.e., superheated steam temperature, the unit is deg.] C. For hot water boiler, the hot water temperature has rated outlet and rated the import of sub backwater temperature. With rated thermal power, rated water temperature and the return temperature corresponding to the rated nominal referred circulating water flow of water through the hot water boiler, the unit is t / h. Heating boiler (iii) an evaporator heating surface and the heating surface of the heat generation rate surface evaporation rate or heating rate is an indicator of the intensity of the boiler work, the greater the numerical value, the better the heat transfer, the smaller the amount of metal consumed boiler. Heating surface evaporation rate general industrial boiler is less than 40kg / (m · h); heating surface of the heating rate of hot water boiler is less than 83700kJ / (m · h) iv) the thermal efficiency of the boiler which is an index indicating economical boiler heat, general industrial combustion thermal coal boiler efficiency of around 60% to 82%. Sometimes, in order to measure the heat economy schematically steam boiler, are also commonly used coal or coal water vapor than the ratio expressed as the ratio of the amount of coal in the boiler per unit time over the period of time and the amount of steam production. Coal-water ratio of about the size and type of boiler, coal quality and operation management quality and other factors. Industrial boilers coal-water ratio is generally l: 6 ~ 1: 7.5. Description (a) Evaporation: desired amount of steam produced per hour steam boiler called evaporation, the unit is t / h steam boiler showed that the size of the rated capacity of evaporation, i.e. in boiler design parameters and ensure a certain efficiency. maximum continuous evaporation, also known as the rated output of the boiler (ii) pressure and temperature: the rated pressure steam boiler of the steam at the outlet of the steam or the hot water boiler rated working pressure rated pressure at the outlet of the hot water boiler is called, and He said maximum working pressure, in units of MPa (iii) an evaporator heating surface and the heating surface of the heat generation rate: refers to the heating surface of the pot soft drinks and other heat transfer medium and the flue gas heat exchange area of ​​the pressure receiving member, usually with smoke metal surface area of ​​the gas-side heating area is calculated, in units of square meters. the amount of steam per hour per square meter of the resulting heating surface, called boiler heating surface evaporation rate, in units of kg / (m · h) per hour hot water boiler m² heating surface of heat generated by the heat generation rate is referred to as heating surface, the unit is kJ / (m · h). (Iv) thermal efficiency: thermal efficiency of the boiler is a boiler effective utilization percentage of the heat input and heat boiler per unit time, also called boiler efficiency, [eta] is represented by the symbol.