Effect of oil cleanliness boiler commercial hot selling 4t steam boiler vietnam steam to the oil pump effect on the cleanliness of the hydraulic pump 1, the installation must be clean tanks, pipes, valves and other hydraulic cylinders and hydraulic test before, filling in the new oil tank when the oil must be filtered using oil vehicle, to prevent the contamination caused by the dirty barrel of oil. 2, must be prevented during transport, since the disassembly packing conduit pipe caused by contamination, and the tank element. Thus, hydraulic oil tank and other devices as far as possible the overall packaging system, as few as possible detached pipe, tubing and fittings must be disassembled at all sealed with a dust. 3, the new pump one week after use, the need to once all the oil filter, oil and the oil filter and washed, and then according to machine work load situation 3 to 6 months to replace a fluid, a cleaning tank. 4, during use of the system is prohibited due to heat generation and the injection hole or opening the fuel tank cap.

1. Reduce the heat loss of boiler exhaust:

(1) The air leakage rate of the high air preheater, especially the air leakage rate of the rotary air preheater;

There is very little pollutant emissions, and national emission standards can be achieved without denitrification equipment. The excess air coefficient of the exhaust gas of the 75-ton power station boiler is only 1.28, and the initial NOx emission concentration is only 139.01mg/m³, which is far lower than the national non-key area limit, and is lower than that of the EU, Japan and other countries. standard.

China Dunhuang International Hotel relevant responsible person said, party fast or aftermarket both in pre-sales, remained consistent patient service, we have solved many difficult problems, with fast boiler, we are assured. --customer feedback