Industrial 1t Natural Gas boiler Distributor Nepal

Low nitrogen gas industrial 1t boiler distributor nepal transformation of environmental significance where the transformation of low nitrogen gas boiler environmental significance where, although natural gas is clean energy, but the combustion process will produce nitrogen oxides, is one of ingredients to form haze. According to the city Thirteen Five energy planning period, from 2014 to 2020, natural gas consumption grew by 14.6 billion cubic meters to 20 billion cubic meters. If you do not take low-nitrogen transformation, the combustion of natural gas will be the main source of nitrogen oxide pollution. After the combustion gas temperature exceeds 1400 ℃, it will generate a lot of nitrogen oxides. Thinking boiler low nitrogen transformation, which is to reduce the combustion temperature to suppress the generation of nitrogen oxides. Chaoyang District Beijing EPB said responsible person, after the transformation, the furnace temperature was controlled at below 1000 ℃, supplemented by staged combustion, flue gas recirculation techniques, such that the concentration of nitrogen oxides is greatly reduced. In recent years, the state vigorously promote clean air plan, Yajian coal. Whether the use of coal-fired central heating boilers, and rural small coal stove for cooking and heating, have changed after another coal to gas in coal, that is, the use of electricity, natural gas and other clean energy alternatives. Thus, in recent years, sulfur dioxide, dust content in the atmosphere continues to decline. But it is worth noting that more and more use of natural gas, also caused a certain amount of nitrogen oxide pollution.

What are the matters needing attention in the retrofit of coal-fired industrial 1t boiler distributor nepal?

With the implementation of the new environmental protection law and the introduction of new standards for the control of atmospheric pollution of boilers, the transformation of coal-fired boilers in various localities has been carried out in an orderly manner, and coal-fired boilers can be transformed into natural gas boilers in the actual operation. Can also be transformed into biomass boilers, but no matter how to reform, in addition to the choice of high-quality coal-fired boiler transformation company, but also need to pay special attention to the following matters.

1. When the boiler is dismantled, attention should be paid to shutting down the blower and stopping operation when the boiler is dismantled, and when the furnace temperature drops to an appropriate temperature, the boiler needs to be dismantled by the relevant parts of the existing boiler to be retrofitted to the coal-fired boiler. Stop the boiler induced fan, chain grate, then the workers enter the furnace from the fire door, remove the original furnace arch of the boiler, clean up the furnace interior, and then remove the main engine and auxiliary machinery of the boiler.

2. Attention to furnace reform is one of the key points in coal-fired boiler reform. The combustion conditions of existing boilers can be improved by reasonable transformation, which can not only accord with the combustion conditions of new fuels, but also play a better role in saving energy. However, it involves re-pouring the furnace, so special attention should be paid to keep the back arch pipe of the boiler away from the center of the flame, so that it will not be burned by the high temperature.

3. Attention should be paid to the modified boiler after a series of projects, such as retrofit of coal-fired boiler, pouring of new boiler front arch and back arch, etc., should be paid attention to after the retrofit of coal-fired boiler is carried out. One of the most important tests is to test the boiler body under certain pressure, and the boiler can be put into use only after the boiler has passed the test and revamped. These are a few things to pay attention to when reforming coal-fired boilers.

The competition, the segment is slowly 45 contestants only a female welder, most of the other competitors from China Electric Power Construction, veteran welders in the petroleum, petrochemical, and other large number of country prefix units, with a very rich practical operation of work experience. Faced with numerous welding expert, slowly segment did not flinch and fear, but to actively exercise their welding ability, the old master who humbly ask to try a variety of different welding methods, and repeat the training to do practice makes perfect. By her welded industrial 1t boiler distributor nepal parts forming the United States, no weld defects neat; in her station, welding clean, neatly stacked tools, work order. It is because of her usual work down to earth, hard work and practice, lay a solid foundation for the success obtained.

1. oil and gas steam industrial 1t boiler distributor nepal system

A complete gas boiler system mainly includes the boiler body, burner, control system and other auxiliary structures