Industrial 6t oil steam boiler Cheap Malaysia

Domestic and foreign customers have different preferences for boilers. The local textile factory in Bangladesh purchased one ton of WNS-type gas industrial 6t steam boiler cheap malaysia and one ton of WNS-type gas-fired steam boiler in our company. This is a highly efficient and environmentally-friendly boiler produced by CBM. Oil and gas boilers are very popular in the foreign textile mill. The oil and gas boilers produced by CBM have high automation, simple operation and excellent environmental performance.

To conscientiously implement the CPC Central Committee and State Council "on the overall strengthening of environmental protection and resolutely fight pollution prevention advice tough fight" and "the State Council on the issuance of three-year winning the Battle of the blue sky plan of action," the spirit, boiler emissions control, prevention and treatment air pollution, the State environmental Protection Department to develop "boiler air pollutant emission standards." In order to further the implementation of air pollution control operations, all regions at the same time meet the national standard, but also have introduced a more stringent local standards.

From the implementation of the Beijing gas nitrogen oxide emission standards for boilers began 30mg, emissions from gas-fired boiler has been of great concern, expand around the "coal to gas" action, so that gas such devices become the most countries to promote clean energy boiler.

The transformation of the current common low nitrogen boiler, there are three main measures: (1) replacement of boilers, (2) replace the burner (3) in the boiler flue gas treatment.

Controlling the nitrogen oxide generated from the source, the most advanced technology on the market today is the use of flue gas recirculation techniques and FGR premix combustion gas boiler technology, both having different focus, low nitrogen emissions boiler.

Replace the boiler burner, renovation and debugging, and the impact on the safety performance of the resulting boiler, burner unit by the responsible manufacturer or his authorized. Beijing Bureau of Quality and Technical Supervision, Beijing Municipal Environmental Protection Bureau issued the "Notice on the transformation of the low - NOx combustion safety risk warning" states: the transformation of low-nitrogen combustion boiler diverse, complex technology, to protect the smooth implementation of the work of reform, effective prevent security risks, prevent accidents, analysis and appraisal by experts, it is not recommended comprehensive safety, environmental factors, the following recommendations:

Nitrogen oxides have been generated by some means and then reduced to nitrogen, the main fuel reburning, selective catalytic reduction, selective non-catalytic reduction. But in the actual monitoring, the nitrogen oxide emissions controllability is poor.

The transformation of low nitrogen gas boiler is a need for long-term adherence and actively manage the work, under the premise to meet the national standards, do specifically address the specific circumstances, not blindly, careless handling, to adopt plans, goals, ideas implementation, to achieve a comprehensive upgrade gas boiler.

Combustion gas treatment and a malfunction due to gas boiler burner ignition misfire bar: 1, the ignition bar gap interposed carbon residue with oil. 2, ignition rods fragmentation. moist. Leakage. 3, the distance between the ignition does not stick, too long or short. 4, ignition rods Insulation damage, short to ground. 5, ignition cable and transformer failure: cable, connector damage caused by a short circuit during ignition; transformer break or other fault occurs. Gas Burner fails, the action bar ignition misfire following five: Clear, renewal, adjust the distance, change and switching transformer. Second, the gas boiler the ignition spark rod misfiring but the reasons: 1, the disk space ventilation carbon cyclone is blocked, poor ventilation. 2, dirty oil nozzle clogging or wear. 3, the throttle angle is set too small. 4, the firing bar from the leading edge from the oil nozzle tip inappropriate (too protruding or retracted) 5, the first solenoid valve is an oil debris blocking gun (gun small kerosene). 6, oily or too viscous to flow easily clogged or the oil filtration system the valve is not opened, so that insufficient suction pump, oil pressure. 7, the filter pump itself blocked. 8, the oil more water (boiling abnormal noise within the heater). Gas boiler ignition spark rod action but misfiring are: clear; the first washing, such as not renewed; turndown test; adjusting the distance (in 3 ~ 4mm as well); Remove cleaning (cleaning the parts diesel) ; check the pipeline and oil filters, insulation equipment; peripheral screw pump removed, carefully remove the cover inside out net oil, diesel oil immersion; renewal of the test oil. Third, when the gas boiler and turn the fire a small fire normal, off, or flashing the causes of instability: 1, air volume damper setting fire too. 2, oil fires micro switch valve (damper outermost that group) inappropriate setting (set throttle air flow rate is greater than the fire). 3, oleaginous easy to spray viscosity is too high (heavy). 4, and the nozzle plate spacing cyclone inappropriate. 5, fire nozzle worn or dirty. 6, the preliminary fuel tank temperature is too high, so that the steam not smooth oil pump oil feed. 7, gas hot water boiler fuel oil water. When a small fire gas boiler normal and turn the fire extinguished or flashing instability action: Test gradually reduced; heating temperature; adjusting the distance (between 0 ~ 10mm); clean or replace; i.e., set to about 50 deg.] C may be; or drain oil change. Fourth, the noise increases gas boiler burner reasons: 1, cut-off valve is closed or the passage into the fuel shortage, an oil filter blockage. 2, the oil inlet temperature is low, the oil viscosity is too high or the temperature is too high the pump inlet. 3, oil pump failure. 4, fan motor bearing damage. 5, dirty fan impeller. Burner gas treatment increased noise: ① the check valve in the oil line is open, if the oil filter is working properly, the filter cleaning pump itself. ② heating oil or reduce the oil temperature. ③ Replace the oil pump. ④ replace motor or bearings. ⑤ cleaning fan wheel.

6 ton oil gas condensing boiler used in paper mill

Last year, a paper mill based in Australia contracted a 6 ton oil gas condensing boiler which model is WNS6-1.25-Y.Q. Our company is responsible for all production work of this 6 ton/hr gas condensing steam boiler. The product utilizes condensation technology to effectively reduce the exhaust gas temperature and improve boiler efficiency. Moreover, the boiler adopts a number of advanced technologies to reduce the emission of harmful substances such as SOx, NOx and COx, and is an efficient and environmentally friendly solution for industrial boilers.